I hope you all are happy with your life. Today we are going to tell you to solve “Ethernet doesn’t have a valid IP configuration”. We Share Full Guide And So Your Problem Successfully Solve Because Of We Find the best ways.
The “Ethernet does not have a valid IP configuration” error normally occurs when your PC device cannot receive the valid IP address from the DHCP server. This server is usually the router in your home network. One of the most common reasons why you are receiving this error message is because there is a problem with the router, an incorrectly assigned computer IP address, or a problem with your computer network card.
Ethernet Doesn’t Have a Valid IP Configuration in Windows 10 [FULL FIX]
A problem with your network interface card or NIC is not a valid IP configuration for Ethernet. This is caused by an invalid IP address being caught by DHCP. In most cases, the problem is caused by a faulty driver or network configuration. In these cases, the fix is very straightforward.
Check Also: How To Install Windows 10 On A New Hard Drive [Guide]
However, if there is a hardware fault, you may need to replace your NIC. Due to this error, you may not be able to connect to the Internet. Listed below are the troubleshooting steps that you must perform to correct this problem.
Ethernet Doesn’t Have a Valid IP Configuration
If you want to help yourself to fix Ethernet, you can try these methods, Windows 10 does not have a valid IP configuration error.
Method 1: Update or Reinstall Network Adapter Drivers
- Open Device Manager Windows 10. You can press the Windows + R key on the keyboard at the same time to open Windows Run. Then type hdwwiz.cpl and press enter.
- Click on the network adapter in the Device Manager window to expand it. Then, you can right-click on your network card and click Update Driver.
- Choose Automatically search for updated driver software to update the network driver for the latest version.
You can also uninstall in the second step to remove the network adapter driver. Then click on the Action tab in the Device Manager window and click Scan for hardware changes to automatically detect and download the latest version of the missing driver. You can also search the manufacturer website for the target driver manually, download and install the latest compatible version of the driver on your computer.
Now, you can check that your problem should be resolved, or else please restart your computer.
Method 2: Run the Windows Network Diagnostic Tools
One of the fastest ways to fix any network-related problem is by using the Windows Network Diagnostic Tool. This network troubleshooter can help diagnose and fix common connection problems.
- Press Windows key + D on your keyboard to open Windows network diagnostic tools.
- Right-click on the connectivity icon in your desktop’s system tray.
- Troubleshooting Select the problem.
- Windows will now perform troubleshooting steps to fix your connection. Wait to confirm that the repair was successful.
Check if your computer’s Ethernet doesn’t have a valid IP configuration error then your problem is solved.
Method 3: Restart Your Computer
This may seem like extremely simple advice, but you will be surprised at how many problems you can fix by just rebooting your computer. Turning it off and back on is the true way. This may work for you. In the closed possibility that it is not and that the problem persists, there is no disappointment.
Method 4: Flush Your DNS
In addition to resetting your Winsock protocol and your IP and TCP settings, you can also try flushing your DNS to fix the problem. Flushing your DNS is so easy. To do this, simply:
- Open the command prompt as you did in the previous step
- Type “ipconfig / release” and press enter
- Type “ipconfig / flushdns”, enter again
- Type “ipconfig / renewal” and enter one last time
After performing these steps, the error must be corrected. If it is not, your computer may need a restart. If you are still getting the error, try another solution.
Method 5: Check Network Adapter Settings
The problem is likely due to incorrect setting of computer network adapters. Basically you will need to make sure that your computer will automatically receive IP addresses and DNS servers and this is a setting commonly found in your network adapters.
- Press the Windows key + R button on your PC.
- Type ncpa.cpl and click OK.
- In the Network Connection window, right-click on your network adapter and choose Properties.
- From the Ethernet Properties window, click Internet Protocol version 4 (TCP / IPv4), and then click Properties.
- Be sure to choose to automatically obtain an IP address
- Be sure to select the DNS server address automatically.
Check if your computer’s Ethernet doesn’t have a valid IP configuration error then your problem is solved.
Method 6: Disable Power Management Optimization
There are some power management settings that will disable some computer functions to conserve power. If this is the cause of the problem then you should try disabling this feature.
- Right-click to the network icon in the system tray.
- Choose the “Open Network and Internet Settings” option.
- Click the “Network and Sharing Center” option and then select the “Change adapter settings” button.
- Right-click on your Internet connection and choose the “Disable” option.
- Right-click on it and choose “Properties“
- Click the “Configure” option and then click on the “Power Management” tab and uncheck the “Allow the computer to power off this device to save power” option.
- Click “OK” to apply your changes.
- Right-click the Internet connection again and choose “Enable“.
- Now, your problem should be solved.
Note: If you have third-party antivirus software installed on your computer, it is likely that this is causing the problem. You should try to disable it, then check if the problem still occurs.
Conclusion
If you have any issues with your computer or Android device, feel free to use the comment section below. We would be more than happy to assist you with any concerns you may have with your device.